BURNDY Master Catalog (20190422)

Transmission IMPLO ® Connection Type Descriptions

IMPLO ® Connection Type Descriptions

Full Tension Joint (FTJ) Splice The IMPLOFTJ/splice consists of analuminumalloy sleevewithanenergywrap preassembled. The FTJ is designed to be installed at the tensioner and pulled through stringing blocks. IMPLO Stringing Charts for each conductor show the relationship between the pulling tension, weight span and the allowable line angle through which the joints may be pulled. This makes splicing an integral part of the overall pulling operation and greatly simplifies the stringing operation. Repair splices for removal and replacement of pre-existing, failing splices while maintaining line sag, are available upon request. Deadends* IMPLO deadends consist of an aluminum alloy sleeve with an energy wrap preassembled. Eyebolts are provided in round or oval-eye configurations, specified at time of order. The eyebolt freely rotates 360 degrees prior to installation, allowing for precise matching to line hardware. A single 15 degree, NEMA four-hole pad is standard. Other pad options are available upon request. Repair deadends for removal of pre-existing, failing deadends whilemaintaining line sag, are available upon request. Jumper Terminal** Jumper Terminals consist of an aluminum sleeve with an energy wrap preassembled, and a 15 degree, four-hole NEMA pad at one end. Jumper terminals may be installed at 0 or 30 degree take-off angles when matched to the deadend with a 15 degree NEMA pad. Repair Sleeve Repair Sleeves consist of two aluminum alloy half sleeves that slide together. An energy wrap is provided on a flexible sheet that is wrapped around the repair sleeve to install. Repair sleeves are used to repair minor damage to the outer strands of a conductor, such as caused by spacer wear, line impacts, or construction mishaps.

T-Tap T-Taps consist of two half sleeves that slide together. One of the half sleeves is provided with a NEMA four-hole pad for making a line tap. Two energy wraps on flexible sheets are provided to make the final installation.

www.burndy.com 1-800-346-4175 (US)

I-54