BRYANT 2021 Full Line Catalog (BC003 1/21)

Technical Information /FUXPSL $BCMJOH 3FRVJSFNFOUT

Supported Media - International Designation

ANSI/TIA-568-C

ISO/IEC 11801 2nd Ed. 2002

CENELEC EN-50173-1: 2002

Category 3 (16 MHz)

Supported

Supported: Class C Supported: Class C Supported: Class D Supported: Class E Supported: Class E A *

Supported: Class C Supported: Class C Supported: Class D Supported: Class E Supported: Class E A *

120 Ω Category 3 (16 MHz) Category 5e (100 MHz) Category 6 (250 MHz) Category 6A (500 MHz)

Not Supported

Supported Supported Supported

Category 7 (600 MHz)

Not Recognized

Supported: Class F

Supported: Class F

50/125 - 62.5/125 Multimode

Supported Supported

Supported Supported Supported

Supported Supported Supported

Singlemode Fiber

Singlemode Fiber to the Work Area

Not Supported

8ork Area Outlet Configuration

4 Pairs T568A or B

4 Pairs T568A Only

4 Pairs T568A Only

Stranded Patch Cord Attenuation 150% of Horiz. Cable Note: *Category 6A requirements will be incorporated into ISO/IEC 11801 and CENELEC EN-50173 after the release of the ANSI/TIA-568-C standards series. 120% of Horiz. Cable 150% of Horiz. Cable

• Strip back only as much cable jacket as is required for termination and maintain pair twists as close as possible to the point of mechanical termination q At a minimum, never allow untwisting of pairs as specified: Category 5e and 6/6A: 0.5 inch max.

Maintain a maximum bend radius of 4x the cable diameter (4-pair cables)

Never exceed a 90 degree bend

Apply cable ties loosely and at random intervals

Don’t oveS-tighten cable ties

Try to minimize the amount of jacket twisting

Don’t oveS-twist cable, it can lead to torn jackets

Avoid stretching the cable

Don’t exceed 25 lbs. of pulling tension

Use appropriate methods for dressing and securing cables: • Cable ties • Cable support bar • Wire management panels • Releasable straps

Don’t use a staple gun to position cable

S-16

www.hubbell.com/bryant/en/

Specifications are subject to change without notice.

Made with FlippingBook Digital Proposal Maker