BRYANT 2021 Full Line Catalog (BC003 1/21)

Wire Management Products

Standard Duty Support Grips

Ideal For Use In: • Industrial applications • Communication towers • Heavy equipment • Utility work • Construction

Application: Supporting vertical and horizontal runs of cable indoors and outdoors when ends of cable are not available • Available for light duty, standard duty and heavy duty applications • Closed mesh fits over cable end while split mesh is used when cable end is inaccessible • Strand equalizers reinforce gripping strength and position, distributes load equally

Offset Eye, Split Mesh, Rod Closing Inches (cm)

Inches (cm)

Tin-Coated Bronze

Stainless Steel

Cable Diameter Range Inches (cm) 63"- 74" (1 60-1 88) 75"- 99" (1 90-2 51) 1 00"-1 24" (2 54-3 15) 1 25"-1 49" (3 17-3 78) 1 50"-1 74" (3 81-4 42) 1 75"-1 99" (4 44-5 05) 2 00"-2 49" (5 08-6 32) 2 50"-2 99" (6 35-7 59) 3 00"-3 49" (7 62-8 86)

Approx. Breaking Strength Lbs. (N) 750 (3,336) 950 (4,226) 1,500 (6,672) 1,500 (6,672) 1,500 (6,672) 2,000 (8,896) 3,100 (13,789) 3,100 (13,789) 4,300 (19,127) 4,300 (19,127)

Approx. Breaking Strength Lbs. (N) 1,950 (8,674) 1,950 (8,674) 2,500 (11,121) 4,200 (18,683) 4,500 (20,017) 4,375 (19,461)

E

Offset Eye

Single Eye

E

M

SPSR062SO SPSR075SO SPSR100SO SPSR125SO SPSR150SO SPSR175SO SPSR200SO SPSR250SO SPSR300SO SPSR350SO

SPSR062SOS SPSR075SOS SPSR100SOS SPSR125SOS SPSR150SOS SPSR175SOS

4" (10 16) 4" (10 16) 5" (12 70) 5" (12 70) 5" (12 70) 6" (15 24) 9" (22 86) 9" (22 86) 11" (27 94)

9" (22 86) 10" (25 40) 12" (30 48) 14" (35 56) 15" (38 10) 16" (40 64) 19" (48 26) 20" (50 80) 21" (53 34) 24" (60 96)

— — — —

— — — —

M

3 50"-3 99" (8 89-10 13) 11" (27 94)

SPSR125SO

Universal Eye, Split Mesh, Rod Closing Inches (cm)

Inches (cm)

Tin-Coated Bronze

Stainless Steel

Dim. to Sliding Bar Fully Ext'd.

Cable Diameter Range Inches (cm)

Approx. Breaking Strength Lbs. (N)

Approx. Breaking Strength Lbs. (N)

Double Eye

Single Eye

E

M

SPSR062L SPSR075L SPSR100L SPSR125L SPSR175L SPSR200L SPSR250L

— — — — — — —

63"- 74" (1 60-1 88) 75"- 99" (1 90-2 51) 1 00"-1 24" (2 54-3 15) 1 25"-1 49" (3 17-3 78) 1 75"-1 99" (4 44-5 05) 2 00"-2 49" (5 08-6 32) 2 50"-2 99" (6 35-7 59)

18" (45 72) 18" (45 72) 18" (45 72) 18" (45 72) 18" (45 72) 18" (45 72) 18" (45 72)

8½" (21 59)

790 (3,514)

— — — — — — —

10½" (26 67) 1,020 (4,537) 12½" (31 75) 1,610 (7,161) 14½" (36 83) 1,610 (7,161) 16½" (41 91) 2,150 (9,564) 19½" (49 53) 3,260 (14,501) 21½" (54 61) 3,260 (14,501)

E

Split rod closing grips are used for pulling slack or providing support when ends of cable are not available The provided stainless steel rod makes threading fast and easy The strands of mesh pass around the rod and match up with strands from the opposite direction Since the rod does not touch the cable at any point it cannot cut the cable Rod closing grips can be removed and reused as many times as desired

M

The following procedures should be used when installing the grip: Wrap the grip around the cable and thread the rod through the pre-formed loops with a corkscrew motion, using the curved end of the rod to engage the loops This requires a simultaneous steady twist and push motion The fingers of the left hand are used to bring the loops together just ahead of the hook on the end of the rod To remove, simply pull out rod

SPSR125L

Never use grip to approximate breaking strength. Refer to page N-26 for safety and working load factors. Banding is necessary to guard against accidental release of grip and provide maximum reliability.

CAUTION

N-16

www.hubbell.com/bryant/en/

Specifications are subject to change without notice.