Aerial Pole Hardware (CA12003E)
Clamps, Clips and Eyes
LASHING WIRE CLAMP
AERIAL INSTALLATION
The EMC lashing wire clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil. Also used to hang terminals and splice cases from strand. • Works with 1⁄4" (6.6M) to 7⁄16" (16M) messenger strand. • Mechanically galvanized for superior corrosion resistance. • Functional equivalent to the “D” lashing wire clamp.
Catalog Number
Description
EM 8009
LashingWire Clamp
For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com
WIRE ROPE CLIPS Body of each clip is galvanized ductile iron designed to fit the strand, which is protected by smooth-rounded contact surfaces. Bolts are made of high-strength steel.
Catalog Number
Strand Size Inches
Approx Ship Wt Each (lbs)
6480 6481 6482 6484 6485
1/4
0.13 0.14 0.23 0.50 1.11
5/16
3/8 1/2 5/8
No. 6485
(1) RUS listed
Used for attaching to thru-bolt or threaded end of straight or angle Thimbleye bolt for down guying. Rounded groove protects guy strand from sharp bending and kinking. Drop-forged galvanized steel. Construction for high-strength application. ANGLE THIMBLEYE® EYE
Dimensions Inches
Catalog Number
Approx Ship Wt Each (lbs)
For Bolt Diameter
Mtg. Bolt Hole A B C
D E
F
G R
0100 (1)
5/8 3/4
11/16 13/16
11/2 11/16 11/2 11/16
13/16 13/16
15/8 15/8
21/2 21/2 9/32 21/2 21/2 9/32
1.20 1.32
0101
Page A75 | August 2022
Made with FlippingBook - professional solution for displaying marketing and sales documents online