Aerial Pole Hardware (CA12003E)

Clamps, Span

MID-SPAN CLAMP INSULATOR

Description

The Mid-Span Clamp Insulator provides extra insulation between the support strand and aerial drop wire. Made from low density polyethylene, it helps prevent lightning burn through of the drop wire jacket, which causes nuisance ground-outs.

AERIAL

INSTALLATION

Features

EM 8010PG

• Simple, economical design is available as a loose piece to install on existing hardware, or it can be ordered on new mid span clamps. • Shaped like a cam, it can be installed on pigtail bolt, located, and then turned to lock in the drop wire bail.

Applications

For use in lightning-prone areas. It is also economical enough to use on every span clamp to help prevent trouble.

Ordering information

EM PG02 Mid-span clamp insulator EM 8010PG Span clamp with teeth and insulator EM 8011PG Span clamp with fingers and insulator EM 8012PG Span clamp with internal teeth, “L”-shaped bolt, and insulator

EM 8012PG

EM 8011PG with drop wire installed

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page A118 | August 2022