Aerial Pole Hardware (CA12003E)

Clamps, Span

MULTI-DROP SPAN CLAMPS When used in conjunction with messengered drop cable, the messenger wire can be installed directly to the multidrop span clamp without a drop wire clamp.

AERIAL INSTALLATION

Features

• Attach multiple drop wire clamps at one location • Bolt staked to prevent loss of nut • Accepts 1/4-inch strand • Hubbell catalog no. PSC2080475

No. PSC2080475

SPAN CLAMPS

For attaching overhead service wire to strand.

Features

• Works on 6M through 25M strand. • Short, shaped teeth give extraordinary gripping power to clamp without touching the web. • Works well on both self-support cable and bare strand. • Especially effective in attaching to duct-on-strand or aerialinner duct. • Meets Spec CA08391 for function and mechanical strength.

EM 8010 on Strand

Ordering information

EM 8010 Span Clamp with Teeth. Standard packaging: 5/sm bx, 100/lg bx, 41 lb/lg bx. No minimum order.

EM 8011 “The Gripper” finger version. Standard packaging: 5/sm bx, 100/lg bx, 41 lb/lg bx. No minimum order.

MID-SPAN CLAMPS

EM 8011

For attaching overhead service wire to strand, and bonding messenger to strand.

Features

• Pigtail bolt reduces chance of messenger wire slipping out of bolt. • Three stainless steel washers with insulation-penetrating teeth contact messenger through jacket. This reduces corrosion and installation time. • Works on .109 through 25M strand. • Short, shaped teeth give extraordinary gripping power.

Insulation Displacement

Ordering information

EM 8012-1PIDC

Pigtail Bolt

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page A115 | August 2022