Aerial Pole Hardware (CA12003E)

Steps

POLE STEPS Steps are made from hot-rolled, open-hearth steel. Hot-dip galvanized. Standard Drive Hook type has fetter drive thread and pilot point for easy starting.

AERIAL INSTALLATION

Catalog Number 506125 (1)

Type Head

Size Inches 5/8 x 10

Approx Ship Wt Each (lbs)

Hook

0.92

No. 506125

(1) NEMA standard.

Detachable Type Steps make a neat appearance and deter unauthorized pole climbing. Installed by placing plate over lag until plate cuts into pole. Nail driven into bottom hole gives extra rigidity. Step fits on lag head. Order lags and steps separately. Lag and plate assemblies are available for either wood pole or steel pole applications. Note: T2050433 and T2050449 are not for composite pole installations. Detachable Type

Catalog Number PS6235 (1) PS6236 (1) T2050433

Approx Ship Wt Each (lbs)

Description

Lag & Plate (for wood pole installation)

0.60 1.05 0.64 1.70

Step

No.PS6235

Bolt & Plate (for steel pole installation)

T2050449 Bolt, Plate, Step (for steel pole installation)

No.PS6236

(1) NEMA standard.

Page A105 | August 2022