Acme - PQS Active Harmonic Filter (AE_PQS_CAT-ActiveFilter)
Animated publication
Active Harmonic Filter
Catalog 1
CONTENTS Descriptions
Page General Information....................................................................... 2 Technical Specification.................................................................3 Ordering Information....................................................................4 Application Data ........................................................................ 5-7
A Hubbell ICD Brand
Industrial Controls Division
Closed Loop Act ive Fi l ter
General Information System Features Nominal voltage 200 V AC -480 V AC, 3 level inverter topology, Real time control with FFT+, each module has ab independent controller. In case of parallel modules installation, the failure of one module would not interrupt the operation of the remaining. Units can filter 2nd to 50th harmonics fully selectable and programmable up to the 25th harmonic order in Selectable mode. Unit operation Modes: All Harmonics, All Harmonics but not fundamental and Selectable Harmonics. These units have unlimited scalability and the load is shared evenly between parallel modules. Conformal coating on all PCB’s. Forced air temperature-controlled fans .
Connections Current Transducer (CT) Network and Load Side, the minimum CT class accuracy needs to be 1.0 or better. No limitations on the primary side, and 1 amp/5 amps load currents on the secondary side, with auxiliary currents less than 5 amps. Units have 5 digital inputs pcs potential free programmable ports, 6 digital output pcs potential free programmable ports, HMI provides 3 pcs operational inputs and 4 pcs operational outputs. Interface 7” touch screen with multilingual graphical display 1 to 7 modules connections in one HMI and unlimited number of HMI can be used in a system. HMI’s software can be updated via an ethernet cable or USB drive. Communication to the HMI can be achieved by Ethernet USB or Modbus TCP/IP.
Mechanical Features Conformal coating on all PCB’s , enclosure is galvanized steel, cooled by temperature-controlled fans. Typical noise at full load between 60 DB – 70 DB per enclosure. Installation and Operation Operating temperature 5°C – 40 ° C and a maximum 85% of non-condensing humidity, up to 1000 m altitude without derating. The enclosure allows for both top and bottom main cable entry.
2
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
Pricing and Ordering Information To create the ordering part number Apex- amperage rating- Enclosure type- System Voltage – D- Main line switch option- Other options Example for 50 amps, NEMA 1, 480 V AC, no options Apex50G4DN1YYY
Amperage Rating
Number of Filters
Rated Frequency
50
1
50 - 560 Hz
100
1
50 - 560 Hz
150
1
50 - 560 Hz
200
1
50 - 560 Hz
300
2
50 - 560 Hz
400
2
50 - 560 Hz
500
3
50 - 560 Hz
600
3
50 - 560 Hz
700
4
50 - 560 Hz
800
4
50 - 560 Hz
Enclosure Types NEMA 1 = G
NEMA 1 2 = A NEMA 3R = W
System Voltage Options 240 V AC = 2 480 V AC = 4
Main Line Disconnect Options No Disconnect = N1 Schneider Electric Molded Case Switch = D2
Rockwell Molded Case Switch = D3 Siemens Molded Case Switch= D4 Eaton Molded Case Switch = D5
Space Heater Options No options = YYY Thermostat Controlled Space Heater = H18
3
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
REVISION
REVISION DATE
REV
EC
DESCRIPTION
REVISION BY
MM/DD/YYYY
A
REV
EC
DESCRIPTION
REV
EC
DESCRIPTION
A
A
24 INCH NEMA 1, 12, OR 3R 50A - 400A NO BREAKER
24 INCH NEMA 1, 12, OR 50A - 400A NO BREAKER 24 INCH NEMA 1, 12, O 50A - 4 0A NO BREAKE 4X .591
23.3 DOOR SWING
26.8 (NEMA 12) 25.5 (NEMA 1) 28.3 (NEMA 3R)
23.7
23.3 DOOR SWING
23.3 DOOR SWING
26.8 (NEMA 12) 25.5 (NEMA 1) 28.3 (NEMA 3R)
26.8 (NEMA 12) 25.5 (NEMA 1) 28.3 (NEMA 3R)
23.7
23.7
21.1
88.8
21.1
21.1
21.1
4X .591
4X .591
SECTION A-A 24IN FLOOR BOLT PATTERN
A
A
88.8
88.8
21.1
21.1
G:\DWG\1. APEX\Mechanical CAD\Size Overview.idw
SECTION A-A 24IN FLOOR BOLT PATTERN
SECTION A-A 24IN FLO R BOL PATTERN
A
A
A
A
G:\DWG\1. AP G:\D
4
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
5
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
6
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
7
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
8
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
9
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
10
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
DESCRIPTION
CONFIDENTIAL THIS DRAWING SHALL BE USED ONLY AS SPECIFIED BY HUBBELL. ANY OTHER USE, REPRODUCTION OR DISCLOSURE TO OTHERS WITHOUT WRITTEN PERMISSION IS PROHIBITED. ALL DIMENSIONS IN INCHES UNLESS SPECIFIED
JOB NAME:
EQUIPMENT DESIGNATION:
DRAWN BY DRAWN
JOB LOCATION: HCAPEX400A4DD2YYY
DB
1
DRAWING TYPE: WIRING DIAGRAM HCAPEX400A4DD2YYY EQUIPMENT TYPE:
SHEET
D
DRAWING STATUS:
OF 1 2
POWER QUALITY SOLUTIONS HUBBELL
DESCRIPTION
WIRING DIAGRAM HCAPEX400A4DD2YYY APEX ACTIVE FILTER
11
CONFIDENTIAL THIS DRAWING SHALL BE USED ONLY AS SPECIFIED BY
JOB NAME:
EQUIPMENT DESIGNATION:
DRAWN BY
DRAWN DATE
CHK BY
CHK DATE
JOB LOCATION: HCAPEX400A4DD2YYY
DB
1/11/2021
EQUIPMENT TYPE:
www.hubbell.com/acmeelectric/en HUBBELL. ANY OTHER USE, REPRODUCTION OR DISCLOSURE TO OTHERS WITHOUT WRITTEN PERMISSION IS PROHIBITED. ALL DIMENSIONS IN INCHES UNLESS SPECIFIED DRAWING TYPE: WIRING DIAGRAM HCAPEX400A4DD2YYY
toll free 800.334.5214 DRAWING STATUS:
REV
SHEET
DWG NO.
HCAPEX400A4DD2YYY
OF 2 2
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
Closed Loop Act ive Fi l ter
12
toll free 800.334.5214
www.hubbell.com/acmeelectric/en
© 2021 Hubbell Industrial Control Division All Rights Reserved, 5/21
A Hubbell ICD Brand
AE_PQS_CAT-ActiveFilter
Made with FlippingBook - Online magazine maker