CA07074E_Above Ground Enclosures

Options Fiberglass Single Phase Junction Mounting Bars All single phase mounting bar designs feature: • Stainless steel parking stands. • Compatability with all grounding options. • 0° - 25° fully angle adjustable mounting plates with detents. • Captive stainless steel hardware. • In-Line Parkings Stands - Offer a low cost option with rigidly mounted parking stands in between junctions. Removes easily with four carriage bolts. Mounting bar material is aluminum. These only work with junctions 13" wide or less; contact the factory for fitment information. • Sliding Parking Stands - Available both above or below the junction mounting bar, these offer extremely versitile feed thru and parking options. Removes easily with four carriage bolts. Mounting bars and parking stand rails are aluminum.

Double Locking Hasps The standard DF3 penta is a traditional horizontal mount design. The hasp is cast aluminum-bronze for high strength and corrosion resistance. Padlock retainer and captive harware are 18-8 stainless steel.

46 | hubbellpowersystems.com | 800.346.3062