2022 BURNDY Master Catalog

Compression Grounding

HYGROUND ® Compression System HYTAP™ Type YGHHC-C Double Figure C Connector

HYTAP™ Type YGHHC-C Double Figure C Connector

IEEE-837 2014 Qualified!

Irreversible compression ground tap figure “C” connectors. Accommodates all cable combinations from #6 solid through 500 kcmil. “C”- shaped opening permits placing two continuous parallel cables into conductor groove. The YGHHC-C series is qualified to IEEE-837 2014. Prefilled with PENETROX™compound and strip sealed.

Commercial Copper Cable toCable or Cable toGroundRod 

InstallationData

StrandedCopper CableRangeMetric

Die Index No.

No. of Crimps

Catalog Number

H L Z

750, 35 Series

45  Series

46  Series

Run

Tap

Run

Tap

35mm² (7.62mm) 70mm² (10.9mm) 95mm² (12.5mm) 120mm² (14.4mm) 95mm² (12.5mm) 120mm² (14.4mm) 150mm² (16mm) 240mm² (20.35mm) 150mm² (16mm) 240mm² (20.35mm) 150mm² (16mm) 240mm² (20.35mm)

35mm² (7.62mm) 70mm² (10.9mm) 10mm² (4.10mm) 70mm² (10.90mm) 95mm² (12.5mm) 120mm² (14.4mm) 10mm² (4.10mm) 70mm² (10.90mm) 95mm² (12.5mm) 120mm² (14.4mm) 150mm² (16mm) 240mm² (20.35mm)

1 Str. (0.328) 2/0 Str. (0.419) 3/8" Rod

1 Str. (0.328) 2/0 Str. (0.419)

1.54 [39]

0.75 [19]

1.88 [48]

YGHHC26C26

O UO

UO UO 2

3/0 Str. (0.470) 250 kcmil (0.575) 1/2" or 5/8" Rod 3/0 Str. (0.470) 250 kcmil (0.575) 1/2" or 5/8" Rod 300 kcmil (0.630) 500 kcmil (0.813) 3/4" Rod

6 Sol. (0.162) 2/0 Str. (0.419)

1.97 [50]

0.88 [22]

2.13 [54]

YGHHC29C26

997

U997

U997

U997

2

3/0 Str. (0.470) 250 kcmil (0.575)

2.06 [52]

0.88 [22]

2.13 [54]

YGHHC29C29

997

U997

U997

U997

2

YGHHC34C26 

6 Sol. (0.162) 2/0 Str. (0.419)

2.42 [62]

0.88 [22]

2.13 [54] 1011 U1011

S1011 P1011

4

YGHHC34C29 

300 kcmil (0.630) 500 kcmil (0.813)

3/0 Str. (0.470) 250 kcmil (0.575)

2.67 [68]

0.88 [22]

2.13 [54] 1011 U1011

S1011 P1011

4

YGHHC34C34 

300 kcmil (0.630) 500 kcmil (0.813)

300 kcmil (0.630) 500 kcmil (0.813)

2.91 [74]

1.10 [28]

2.58 [66] 1011 U1011

S1011 P1011

6

 45 Series tools require PT6515 adapter to use "U" or "PU" die  46 Series tools require PUADP1 adapter to use "U" or "PU" die

Ground Rod  Dia.

PRECRIMP Dies

 When attaching connector to ground rod, ground rod must be embossed with appropriate PRECRIMP die. For connectors that must meet IEEE 837 requirements, UPRECRIMP-type precrimp dies must be used for maximum clamping retention. No precrimp needed if using S1012, P1011 or U1011 die sets.  These connectors cannot be installed with the 35 Series

UPRECRIMP12 UPRECRIMP58 UPRECRIMP34

1/2" 5/8" 3/4"

U2CABT

www.burndy.com 1-800-346-4175 (US)

E-12