2020 BURNDY Master Catalog

Mechanical Grounding

Type BWB680 Series Pool Water Bonding Kits Type BWB680 Series BURNDY ® Pool Water Bonding Kits

NEC 680.26(C) states: “An intentional bond of minimum conductive surface area of 9″ shall be installed in contact with the pool water. This bond shall be permitted to consist of parts that are rquired to be bonded in 680.26(B)”. In order to comply with this requirement BURNDY is offering the BWB680 Series. Made of non-corrosive stainless steel, the BURNDY water bonding kit maintains constant contact with pool water to ensure that the pool is effectively bonded at all times. BURNDY BWB680 Series is one of the few and the most user friendly, products on the market that complies with this code. Other products are placed in the plumbing, which is not always in contact wtih the water and therefore does not meet the code. Since the BWB680 Series is placed in the skimmer, it is always in contact with the water. Included in the BURNDY BWB680 Series Bonding Kit: One (1) bonding plate; one (1) rubber sealing washer; two (2) flat washers; two (2) lock washers; two (2) nuts; and

INSTALLED VIEW

CUTAWAY VIEW

Typical Pool Skimmer

one (1) BURNDY CL501-TN. Features & Benefits • Easy installation •

BURNDY CL501TN (included)

Bonding Plate (Stainless Steel)

Bonding Plate (Stainless Steel)

Mounting hardware included

•

UL Listed

Rubber Washer

• Placed out of the way on the side wall of the skimmer below the basket

BURNDY CL501TN (included)

Catalog Number

Pool Type

BWB680AG BWB680IG

Above Ground

In-Ground

Bonding wire goes here

1-800-465-7051 (Canada) 1-603-647-5299 (International)

E-59