2020 BURNDY Master Catalog

Compression Connections

Copper HYSTACK™ Terminal Stacking Adapters TYPE CUSA HYSTACK™ Terminal Stacking Adapter

The HYSTACK™ adapter is specially designed to get terminals to the back end of a bus bar or other areas that require terminals to be elevated off the mounting surface. These HYSTACK™ adapters are made from high conductivity copper and tin-plated to provide optimum corrosion resistance. It will accommodate #10 AWG through 750 kcmil HYLUG™ terminals.

Features & Benefits •

For use on terminals made from copper

• Designed specifically for stacking standard terminals; uses include: • Place the stacking adapter on the mounting plate and a terminal on top of the stacking adapter and bolt down • Placing a stacking adapter on a terminal pad that will be mounted to a bus bar or mounting plate and a terminal on top of the stacking adapter, and bolt down • May be used with standard NEMA two and four hole terminals; to stack four hole NEMA terminations use two stacking adapters assembled side-by-side • Stacking adapters are clearly marked

Accessories •

Hardware - Section F

• • • •

PENETROX™Oxide Inhibitor - Section F Heat and Cold Shrink Tubing - Section D WIREMIKE™Wire Micrometer - Section F Wire Management (Cable Ties) - Section G

Catalog Number

Stud Hole Size

Stud Hole Spacing Length Width Height

CUSA442TC38 CUSA442NTC

3/8″ 1/2″

1″

1.75″ 3.00″

1.12″ 1.12″

1.50″ 1.50″

1-3/4″

Note: All dimensions shown are for reference only.

Reference: Catalog Number TMH332. This TMH332 Kit has just the right hardware when using the CUSA442TC38 HYSTACK on a 1/4 bus bar with a 4/0 through 750 kcmil HYLUG™.

1-800-465-7051 (Canada) 1-603-647-5299 (International)

C-135